All That You Need To Know About Flash Programmer For ARM7/9/11, Cortex, RX, and PPC cores

Stand-alone programming tool for ARM/Cortex, Renesas RX, and PPC microcontrollers. This device comes with a license for the software item 8.08.02 J-Flash, which is the software used to configure the Flasher PRO. Flash memory stores the target program and target information. A target system is required.

 

Flash Programmers for ARM MCUs is a programming tool for microcontrollers with on-chip or external Flash memory and ARM, RX, or PPC core. Flasher PRO is designed for programming flash targets with the J-Flash software or stand-alone. 

In addition to that Flasher PRO has all of the J-Link functionality. Flasher PRO connects via USB, Ethernet, or via RS232 interface to a PC, running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7, or Windows 8 and has a built-in 20-pin JTAG connector, which is compatible with the standard 20-pin connector defined by ARM.

Features

  • Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)

  • Ethernet interface

  • Supports internal and external flash devices

  • A wide range of devices is supported. For a complete list

  • Free software updates1, 2 years of support

  • 128 MB internal NAND flash, used for storing configuration and data files

  • Serial in target programming supported

  • Data files can be updated as mass storage or via J-Flash

  • Target interface: JTAG / SWD

  • No power supply required, powered through USB

  • Can be used as a J-Link (JTAG emulator) with a download speed of up to 1 MByte/second

  • Programming speed is typically between 30 KBytes/second and 1 MByte/second. Max. programming speed highly depends on the target hardware and max. programming speed of the flash itself.